Water2Buy RO 3.2, Руководство пользователя

Страница: 2 / 85

2
Safety & Care Advice
You must turn off mains water to your home before installing the reverse osmosis system.
W ater2buy™ installation policy: All installation shall be performed in a neat, professional
manner in accordance with generally accepted trade practices. Further, all installations shall
comply with all local laws, codes, regulations, and ordinances.
Read all steps, guides and rules carefully before installing and using your reverse osmosis
unit. Follow all steps exactly to correctly install. Reading this manual will help you get all the
benefits from your reverse osmosis unit.
Do not attempt to use this product to make safe drinking water from non-potable water
sources. Do not use the unit on microbiologically unsafe water, or water of unknown quality.
Check with your local water department for plumbing and sanitation codes. You must respect
their instructions and codes while installing the unit. This guide is a suggested install method;
follow your local codes if they differ from the instructions given in this manual.
The non-pumped reverse osmosis unit works on water pressures of minimum 1.7bar (25 psi)
to maximum 6 bar (90 psi). If your house water pressure is over the maximum, install a
pressure-reducing valve in the water supply pipe to the reverse osmosis unit.
The pumped reverse osmosis unit works on water pressure of minimum 1bar (15psi) to
maximum 6 bar (90 psi). If your house water pressure is over the maximum, install a
pressure-reducing valve in the water supply pipe to the reverse osmosis unit.
Do not install the reverse osmosis unit outside, or in extreme hot or cold temperatures.
Temperatures of the water supply to the reverse osmosis unit must be between 5c and 40c.
Do not install on hot water supplies.
The reverse osmosis membrane comes in an airtight sealed bag for storage and shipment, do
not use if seal is broken.
Caution: chlorine in the water will destroy the reverse osmosis
membrane. Most cities add chlorine to the water supply to kill bacteria.
The pre-filter removes chlorine before it enters the reverse osmosis
membrane. It is important to replace the filter cartridges at least every 12
months.
Where to install your reverse osmosis unit
The reverse osmosis assembly and storage tank is designed for installations under the sink,
usually in the kitchen. The reverse osmosis assembly mounts on a wall surface, or can sit on
the cabinet floor next to the storage tank. The reverse osmosis product water tap installs on
the sink, or on the countertop next to the sink.
Tubing lengths should allow for the removal of the assembly from the hanger washers for
servicing. If tubing lengths are shortened for neater appearance, it may be necessary to keep
the assembly on the hanger washers for service.
You can also locate the reverse osmosis assembly and storage tank in any remote location
from the tap, observing safety guides in this manual. You do need a nearby water source and
drain point.