Water2Buy RO 3.2, Руководство пользователя

Страница: 3 / 85

3
Installing your reverse osmosis unit
Check parts included: unpack the box and remove the reverse osmosis unit. In addition to the
assembled reverse osmosis and the storage tank, the unit includes the parts listed below:
•
Reverse osmosis unit
•
Storage tank
•
Tap, washers and quick connect fitting.
•
Manual
•
W aster clamp
•
Saddle valve
•
Inlet water connector and valve
•
Bracket (Used where you want to mount the tap directly onto the unit)
•
Tank valve
•
Housing Spanner
•
Mounting screws
•
Tubing
•
Power supply (RO 600, RO 650 & RO 700 models only)
•
Mineral Filter (RO 550 & RO 650 models only)
•
UV Filter (RO 700 model only)
Tools and materials needed
•
Adjustable wrench / Plumbing wrench
•
Pliers
•
Pipe wrench to fit sink drain
•
Screwdriver
•
Teflon tape or Pipe joint compound (thread seal, approved for use on potable water
supplies
•
Drill with 3mm, 5mm and 12mm bits.