HOW TO USE YOUR POOL BLASTER
CAUTION:
The Pool Blaster is designed for
underwater use only
. Do not
attempt to use your Pool Blaster to clean anything other than your pool or spa. It is not
intended for use as an all-purpose vacuum cleaner. Unit must be submerged in water to
operate properly. Maximum operating temperature is b5DEGC (41˚F) and
+40DEGC (104˚F). Maximum operating depth is 4 meters (15 ft)
•
Close supervision is necessary when used near children. Do not allow this
vacuum cleaner to be used as a toy.
•
This vacuum creates suction. Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
•
The Pool Blaster can be used without the head attachment. However, when
using the head attachment, be sure that either supplied wheels or brushes
are inserted in place.
•
Avoid picking up hard, sharp objects with the vacuum. They may damage
the vacuum and the filter bag.
•
Do not use without filter bag/seal ring and nose cap in place.
•
Replace damaged filter bag/seal ring promptly.
•
Do not use your Pool Blaster to pick up toxic substances, flammable or com-
bustible liquids such as gasoline, or operate in the presence of explosive or
flammable fumes.
•
Never insert or drop any object into any opening on the device. Do not use
with any opening blocked. Keep all openings free of leaves, rocks, or any-
thing that may reduce water flow.
•
Do not use on or near hot surfaces.
•
Use extra care when cleaning on stairs.
•
When not in use, store the Pool Blaster indoors in a clean, dry place. Do not
leave in direct sunlight, underwater, or exposed to extreme temperatures.
Your Pool Blaster is designed for use in 3 different ways to vacuum your
pool or spa:
A. Vacuum using the handle and the vacuum head removed.
B. Vacuum using the handle and attached vacuum head, with either wheel or
brush attachments depending on pool type.
C. Vacuum using a standard vacuum pole (not supplied) with the attached
vacuum head.
WARNING:
Never use your Pool Blaster without the filter bag/seal
ring and nose cap properly in place. Doing so will VOID the warranty.
Using a standard pole
The pole attachment on your Pool Blaster is designed to accommodate any standard
pole. To attach a pole, simply press down on the alignment pins on the pole retaining
spring clip. Aligning the holes, slide the pole onto the Pool Blaster and release the clip.
WARNING:
Do not lean on pole or use pole to support weight.
