CONGRATULATIONS on your purchase of a top-quality Water Tech product
which has been thoroughly tested to meet our exacting quality control standards.
State of the art Nickel-Metal Hydride batteries power the Pool Blaster. These are
the same batteries used in many portable phones. In order to properly ventilate
and cool the batteries and drive system a certain amount of space is left open in
the Pool Blaster body. As a result, from time to time, water may enter the unit.
In order to allow for any water to be drained you should remove the On-Off Knob
after each use, turn the machine so the knob is towards the floor and tilt side
to side in all directions. The amount of water may be very small or not noticed
at all. After removing any water use a blow dryer on warm setting to dry any
moisture build-up on the inside of the motor box. Water entering the Pool Blaster
body presents no safety hazard and should be drained occasionally to avoid any
chance of long-term corrosion. The batteries and motor in the Pool Blaster are
long lasting and proper care will help to prolong the life of your appliance.
These guidelines and safeguards help insure that your new Pool Blaster oper-
ates effectively. Please read all instructions carefully before using your Pool
Blaster. Please take a few moments to review the following IMPORTANT INFOR-
MATION before using this tool.
READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS
PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FAILURE TO FOLLOW ALL INSTRUCTIONS, WARNINGS AND CAUTIONS
MAY RESULT IN SERIOUS PERSONAL INJURY, PROPERTY DAMAGE
AND/OR MAY VOID YOUR WARRANTY.
Before Initial Use
