Your Pool Blaster has a unique patented vacuum head that can be adapted to use on all types of
pool surfaces. We recommend the following:
•
For gunite, we recommend using the five (5) wheels (part no.PBW050) which came
with your Pool Blaster. The five wheels are inserted into the vacuum head (part
no.PBA006), as shown in the diagram. To prevent damage to your pool, ensure all
five (5) wheels are fully inserted into the vacuum head before you begin use. NOTE:
Inserting the wheels into the vacuum head may require a good deal of force. If you
have trouble, you may find it easier to insert them by placing on a hard surface and
pushing down on the head.
•
For vinyl liner and fiberglass pools we recommend using the eight (8) brushes (part
no.PBW049) which came with your Pool Blaster. The eight (8) brushes are inserted
into the vacuum head (part no.PBA006), as shown in the diagram. To prevent dam-
age to your pool, ensure all eight (8) brushes are fully inserted into the vacuum head
before you begin use.
Note: Wheels OR Brushes must be installed prior to use.
Water Tech is NOT responsible for damages to your pool if
neither the wheels nor brushes are installed in the vacuum
head before use.
CAUTION:
Do not use the Pool Blaster vacuum head without either the supplied
wheels or brushes inserted.
Please follow these instructions carefully:
•
Place the Pool Blaster on its end on a stable and secure surface.
•
Place the filter bag/seal ring (part no.PBW022AP) into the Pool Blaster, as shown in
diagram. Make sure the rubber seal ring sits on the funnel. All of the filter bag must
be inside the funnel to ensure the head closes fully.
•
Put the nose cap (part no.PBA002) on the funnel, as shown. Align the nose slots
with the upper and lower latch on the Pool Blaster.
•
Close the upper and lower latch together squeezing the filter bag/seal ring in be-
tween.
NOTE: You should not need to apply excessive force in order to close the latch. If you have
trouble, make sure the filter bag is not between the seal and the nose cap or funnel and there are
no other obstructions such as sand
.
ENSURE BOTH LATCHES
ARE FULLY SECURED
SETTING UP YOUR POOL BLASTER FOR USE
INSERTING THE FILTER BAG
