Water Right Sanitizer Plus, Руководство по программированию

Страница: 12 / 16

12
SOFTWARE VERSION
XXX xx
TOTAL GALLONS
0
X1K
TOTAL DAYS
970
TOTAL REGENS
190
1
ERROR LOG 6146
101
1 4
6
TOTAL BRINE ERRORS
1
5
2
3
Second Level History Screens
Accessed by pressing
+
and
–
simultaneously for three seconds.
Once screen changes, press
+
and
–
simultaneously again for three seconds.
Non-resettable history.
Displays software version
Displays total gallons used by
Meter 1 since startup
Displays total days unit has been
in service
Displays total regens since startup
Displays last ten valve errors that occurred
Scroll through with
+
or
–
buttons.
A four digit number in the upper right corner of the
display indicates the motor position during the time
of error for logged drive errors.
Displays last ten valve errors that occurred
Scroll through with
+
or
–
buttons.
Error Code Error Code Description
101 UNABLE TO START: Valve not sensing valve movement with motor energized.
102 MOTOR STALLED: Valve unable to find next cycle position (stalled).
103 MOTOR RAN TOO LONG: Valve unable to find next cycle position.
104 VALVE HOMING: Valve unable to find Home position.
106 MAV 1 RAN TOO LONG: MAV 1 motor ran too long. Unable to find proper park position.
107 MAV 1 STALLED: MAV 1 motor ran too short. Unable to find proper park position (stalled).
109 INVALID MOTOR STATE: Control can no longer operate properly due to detection of an invalid motor state.
116 MAV 2 RAN TOO LONG: MAV 2 motor ran too long. Unable to find proper park position.
117 MAV 2 STALLED: MAV 2 motor ran too short (stalled). Unable to find proper park position.
201 INVALID REGEN STEP:
Control can no longer operate properly due to detection of an invalid
regeneration cycle step. Internal software issue.
204 LEAK DETECTED
402 POWER DOWN MEMORY:
Check sum error for operational data and status section of EEPROM memory
- specific type of memory error.
403 PROGRAM MEMORY:
Check sum error for programming section of EEPROM memory
- specific type of memory error.
404 DIAGNOSTIC MEMORY:
Check sum error for diagnostic section of EEPROM memory
- specific type of memory error.
405 HISTORY MEMORY:
Check sum error for history section of EEPROM memory
- specific type of memory error.
406 CONTACT MEMORY:
Check sum error for contact screen section of EEPROM memory
- specific type of memory error.
407
STATUS RAM MEMORY
FAILURE:
Control can no longer operate properly due to corrupted data detected in the Operational Data and Status Section
of RAM memory. Once generated, the Error Mode is not entered nor an error displayed, instead previously stored
data (<6 hours old) is used to maintain control operation.
408
DIAGNOSTIC RAM
MEMORY FAILURE:
Control can no longer operate properly due to corrupted data detected in the Operational Data and Status Section
of RAM memory. Once generated, the Error Mode is not entered nor an error displayed, instead previously stored
data (<6 hours old) is used to maintain control operation.
410 CONFIG DOWNLOAD:
Configuration file downloaded to the control was not originally uploaded from
another control with the identical software revision.
Error Codes and Descriptions
REMINDER: Press and hold NEXT and REGEN for three seconds to perform a soft reset and clear an error on screen.
return to
general display