Water Right Sanitizer Plus, Руководство по программированию

Страница: 5 / 16

5
continue to next page
FILL
SET
CYCLE 1
DOUBLE REGEN
SET
10%
>
GALLONS CAPACITY
SET
AUTO
SOFTENING
SET
CYCLE 2
CYCLE 3
SOFTENING TIME
SET
240:00
MIN
LBS
12:00
MIN
BACKWASH
SET
BACKWASH TIME
SET
FILL
SET
15.0
X1K
GRAINS OF CAPACITY
SET
32.0
SOFTENING
SET
TYPE
1
2
3
4
5
6
7
8
9
10
Service/OEM SOFTENING Screens
Accessed by pressing and holding NEXT and
–
simultaneously for three seconds.
Returns to general display after five minutes of inactivity.
Select SOFTENING or FILTERING with + or — buttons
If you have selected FILTERING, please refer to “Service/OEM FILTERING screens”, page 7-8.
Set system’s grains of capacity with + or — buttons
X1K = 1,000 grains.
The default setting is 32.0
Set gallon capacity with + or — buttons
•
AUTO automatically calculates gallon capacity.
• OFF will regen by days override setting only.
•
GALS BETWEEN REGEN will regen by specific gallon setting.
• The default setting is AUTO.
Set double regen point with + or — buttons
If unit’s capacity is overrun by this percentage, the unit will
regenerate two nights in a row. Default setting is 10%.
Set softening time with + or — buttons
This time window allows the salt to dissolve and achieve proper brine
strength. This process will start prior to regen time setting.
Default setting is 240:00 minutes.
Set salt pounds per regen with + or — buttons
The unit will deliver soft water during this position.
Default setting is 15.0 pounds.
Set backwash time with + or — buttons
Default setting is 12:00 minutes.
Set second cycle position with + or — buttons
This position is used between brine tank fill and the
start of backwash. The unit will deliver soft water
during this position.
Set third cycle position with + or — buttons
Set first cycle position with + or — buttons