User Guide
2
water-protec.com
Live with peace of mind
1. Valve : A smart stainless steel valve is installed at the main water inlet and
will automatically shut off water supply if sensors detect a leak. This valve can
handle a pressure of 150 Psi and it is a full port valve.
2. Control Panel : This panel gives you access to the main control functions of the
system. It can control up to 2 electronic valves. It is equipped with a 9 V battery
to operate the system in situation of power failure.
3. Remote control: From a distance, you are able to close or open the water supply
manually.
4. The sensors: The basic kit includes 5 sensors that must be placed in strategic
locations on the floor (for example, near the water heater, sinks, etc.) The sensors
send an alarm signal if the stainless steel electrodes simultaneously detect
water. They also send an occasional signal to the control panel to indicate that
they are functional.
5. Power adapter: A 12V DC (direct current) power adapter.
Contenu de base
Sensors with cable or
detection plates
are available for hard-to-reach places
(dishwasher, refrigerator, etc.).
Please note that the valve actuator is closed once a month
(every 650 hours) to prevent debris from accumulating and
interfering with proper operation.
Communication : RF - radio
frequency approbation: FCC/ISED
FCC: CA2040; IC: 2040A-4 (Ottawa/
Almonte); FCC: CA2041; IC: 2040G-5
(Montreal); CA0101 (Cambridge)
Canada and US Certification
C
US
62368
62368
Electrical Safety
–
UL
62368
-1
