Warranty / Maintenance information
All BrassMaster Plus water softeners feature
the Assured Performance Modular (APM)
design. If you experience a failure of any
valve component, the brass module can be
easily removed and replaced with a factory
remanufactured replacement module.
To remove module, index the bypass valve
to its “Bypass” position. Follow steps in
“Placing unit into service” to step valve
through all 4 cycles, but do not open bypass
valve. When this procedure is performed
with the bypass closed, it will relieve any
water pressure on the unit.
Remove the stainless-steel retainer pins at
the base of the module, loosen the clips at
the bypass valve, and disconnect the drain
line and brine line. The module will now
completely separate from the tank. Please
contact your dealer or the factory for
module support.
Limited Warranty
Please see enclosed
Official Warranty
for complete warranty details.
