Start-up procedure
Setting current time
User programming
User Programming Mode Steps
1. Press the Up and Down buttons for five seconds while valve is in service. Display will
enter programming mode.
2. Set Day Override:
This setting specifies the maximum number of days between regen-
eration cycles. System will regenerate regardless of usage if the days since last regeneration
cycle equals the day override setting. This insures regular regeneration periods. In areas of
heavy iron water conditions, this setting should not exceed 5 days.
Setting time of day
1. Press either the Up or Down buttons to adjust current time of day by one digit. Push
and hold either up or down set button to adjust current time of day display by several
digits.
