Quick Set up Guide WG13 Alarm & Keypad 29 03 2022 V1
Sensor Type
Motion PIR
Door Contact
Smoke
Gas
Carbon Monoxide
Vibration
Water Leak
Photoelectric beam
Glassbreak
Panic
Doorbell
Air quality
Others
➢
The Mode should then be selected, depending on how and when you want the device
to alert.
There are many different ways the alarm and sensors can be armed, giving you different
options depending on if you are home or out.
Each sensor is designated a Zone Mode, which
defines the way in which the system responds to breaches in that zone and arming and
disarming.
To set up your sensors so that they will alert you when you want to be alerted, please choose
from the list below and ensure your sensors are designated as required. The Zone modes
can be changed at any stage but it is best to set up to suit your needs from the beginning.
Tap
Accessories
and pick the sensor you want to set, then change
Zone Mode
as follows;
Normal
Sensors set to Normal Zone are activated in Arm (full arm) or HOME Mode
(home/stay/partial arm). We recommend setting door/window sensors to
Normal Zone.
24 Hours
Sensors set to 24H Zone will activate the alarm when triggered, regardless of
the alarm status (Armed or Disarmed). This setting is useful if you have an
area in your home that you don’t want people entering or at least you wish to
be notified if someone does enter. Alternatively, if you need to be alerted if
someone opens a door to leave the house, this setting can be used.
Delay
If sensors set to Delay Zone are triggered, the panel will sound the alarm after
the delay time has passed. We recommend setting door sensors with a delay
if they are used as primary entry points as this allows you time to disarm the
alarm before the siren goes off. You can choose the length of time you need.
Home
Sensors set to Home Zone mode are only activated in Arm (Away arm). If Home
Arm Mode (partial/home arm) is used, these sensors are not armed and will
not activate the alarm if triggered. We recommend setting PIR Motion Detectors
to Home Zone. If you are at home and wish to be able to walk around your
home without the alarm sounding, this is the setting you will need.
24 Hours
The mode is same as 24 Hours but there will be no sound triggered.
Silent
Home with
It is same as Home but with Entry Delay in Home Arm.
delay
