Quick Set up Guide WG13 Alarm & Keypad 29 03 2022 V1
Installation of Wireless PIR Motion Sensor
Mounting height - Motion sensor should be mounted 2m to 2.2m above the floor.
Mount the bracket with the Adhesive pads or screws provided. Fit the motion sensor in the
bracket and set the direction of the detection range of the motion sensor.
Detection Area
Top View Side View
Notes
.
1.
Do not install the PIR Motion sensor outdoors or on glass.
2.
PIR Motion Sensor cannot detect motion through glass if someone is moving outside
a window
but it can give false alerts from outside motion so do not direct towards a
window from inside.
3.
Do not install in places where the PIR Motion Sensor could get wet.
4.
Do not install the PIR Motion Sensor within 1 meter of a heat source such as an electric
heater, heat vent or fireplace or a source that may produce turbulent air.
5.
Do not install the PIR Motion Sensor behind large appliances or furniture that may
obstruct its motion sensors.
Smoke Alarm
Pairing your Smoke Alarm
Ensure the Alarm Base Station is plugged in and turned on:
STEP 1
. Open the back of the Smoke Alarm and remove the plastic covering from the battery.
Re insert the batter taking time to ensure you have the b and – matched correctly.
