WatchNet EL12004RT, Инструкция по установке и эксплуатации

Страница: 66 / 91

66
7 WEB CLIENT OPERATION
Please note, all the operations here in chapter seven are using a 16-ch DVR as
an example. There might be slightly differences in the interface due to different
series.
7.1
Network connection
Before web client operation, please check the following items:
•
Network connection is correctly setup
•
DVR and PC network is setup correctly. Please refer to network setup (Main
menu->setting->network).
•
To test, try to ping ***. ***. ***. *** (*** being the DVR’s IP address) to check
the connection. Usually the return TTL value should be less than 255.
7.2
Login and logout
Open IE and input the DVR address in the address column. For example, if the
DVR IP is 10.1.27.200, then please input http://10.1.27.200 in the address
column.
Note: A warning may pop-up asking to want to install webrec.cab control. Click
the yes button. If downloading the ActiveX control fails, please modify the
settings as follows.
See
515H
Figure 7-1.
Figure 7-1
Note: If using Windows Vista, please make sure to un-check User Account
Control (UAC).
After installation, the interface is shown as below. See
516H
Figure 7-2.