WatchNet EL12004RT, Инструкция по установке и эксплуатации

Страница: 51 / 91

51
5.3.6 Alarm
Please refer to chapter 4.6 Alarm Setup and Activation.
5.3.7 Detect
Please refer to chapter 4.5 Detect.
5.3.8 Pan/Tilt/Zoom
The pan/tilt/zoom setup includes the following items. Please select channel
first. See Figure 5-14.
•
Protocol: Select corresponding PTZ protocol such as DH-SD1.
•
Address: Input corresponding PTZ address.
•
Baud rate: Select baud rate.
•
Data bit: Select data bit.
•
Stop bit: Select stop bit.
•
Parity: There are three choices: None/Odd/Even.
After completing setup select the save button, this will go to the previous menu.
For detailed setup information, please refer to chapter 4.9
preset/patrol/pattern/scan.
Figure 5-14
5.3.9 Display
Display setup interface is shown as below. See
459H
Figure 5-15.
•
Transparency: Here the menu transparency can be adjusted. The value
ranges from 128 to 255.
•
Channel name: Here the channel name can modified. Please note any
modifications here only apply locally to the DVR. The opening of the web or
client end is needed to refresh the channel name.
•
Time display: Toggle if time is to be displayed.
•
Channel display: Toggle if the channel name is to be displayed.
•
Overlay information: System displays some information in the screen for
reference.
•
Enable tour: Activate tour function.
•
Interval: Change the time each channel is shown in Tour mode. The value
ranges from 5-200 seconds. In tour process, use the mouse or click Shift to
turn on window switch function.
Stands for opening switch function,
stands for closing switch function.
•
View1/4/9/16: System support 1/4/9/16 window tour.
•
Display: Auto / VGA /TV controls video output for displaying the DVR
interface.
Please highlight icon to select the corresponding function.