WatchNet EL12004RT, Инструкция по установке и эксплуатации

Страница: 43 / 91

43
•
Connect power adapter to the dome.
4.8.2 PTZ Setup
Note:
The camera video should be in the current screen. Before setup,
please check the following connections are correct:
•
PTZ and decoder connection is correct. Decoder address is correctly setup.
•
Decoder A (B) line connects with DVR A (B) line.
Boot up the DVR, input user name and password. In the main menu, click
setting, and then click Pan/Tilt Control button. The interface is shown as in
410H
Figure 4-23. Set the following items:
•
Channel: Select the current camera channel.
•
Protocol: Select corresponding PTZ protocol (such as DH-SD1)
•
Address: Default address is 1.
•
Baud rate: Select corresponding baud rate. Default value is 9600.
•
Data bits: Select corresponding data bits. Default value is 8.
•
Stop bits: Select corresponding stop bits. Default value is 1.
•
Parity: There are three options: Odd/even/none. Default setup is none.
Figure 4-23