WatchNet EL12004RT, Инструкция по установке и эксплуатации

Страница: 13 / 91

13
2 OVERVIEW AND CONTROLS
This section provides information about front and rear panel. When installing the
DVR for the first time, please refer to this part first.
2.1
Front Panel
This DVR series has two different front panels. Refer to Figure 2-1 and Figure 2-2
for both of these front panels.
Figure 2-1
S/N Name Icon Function
1 Power Button POWER Power button, press and hold for three seconds to shut down the DVR
2 Power Indication Light LED Power indication light
3
Remote Control
Signal Receiver
IR Is used to receive signals from the remote control
Confirm operation
4 Enter ENTER
Enter Cursor Selection
Cancel cursor selection
5 Cancel EXIT
During Playback, restore to real-time monitor
In real-time monitor mode it works as the left / right direction keys.
In playback mode, turn clockwise to go forward, and counter-clockwise to go
backwards
Acts similar to up/down direction key in menus
In playback mode, turn inner dial to perform frame by frame playback
6
Jog and Shuttle
(Inner and Outer Ring)
Knob
Turning the outer ring clockwise moves right, counter-clockwise moves
left.
Turning the Inner dial clockwise moves down, counter-clockwise moves up.
7 Switch View Mode View Switch between one, or multiple window display modes
8 Recording Light
LED
1-16
If the LED is Green, it means the recording is on.