27
4.4. Deleting a Detector
TO DELETE A DETECTOR
1.
Safety Lock must be
off
Ensure Safety Lock has been turned off within the last 5
minutes. See
Section 4.2.
2.
Press both buttons
for 3 seconds
Enter Programming mode by pressing
buttons 1 & 2
together for
3 seconds
. The siren will
beep 3 times
to
confirm you have entered programming mode.
3.
Press 1 time
Within 3 seconds, press
Button 1
to select
detector
programming
. You will hear
1 beep
as confirmation.
4.
Press 1 time
Within 30 seconds, press
Button 2
to
DELETE
a
detector. You will hear
2 beeps
as confirmation.
5.
Press the number of
times of the zone you
want to delete
Within 5 seconds, press
Button 1
. The first beep you
hear indicates zone 1. Each additional press of
Button 1
will increment the
zone
you wish to delete and you will
hear 1 beep each time. For example, if you push
Button
1
, five times then this would select zone 5 to be deleted.
6.
Press to delete &
exit
Within 5 seconds press
Button 2
. The selected zone will
be
deleted
. The system will beep the number of times of
the zone that has been deleted (if you hear
3 low tone
beeps,
you have passed zone 8, or no valid zone was
selected). You have now completed deleting a detector.
The system will
exit
programming mode.
