25
4.3. Adding a Detector
+
TO ADD A DETECTOR
1.
Safety Lock must
be off
Ensure Safety Lock has been turned off within the last 5
minutes. See
Section 4.2.
2.
Press both buttons
for 3 seconds
Enter Programming mode by pressing
buttons 1 & 2
together for
3 seconds
. The siren will
beep 3 times
to
confirm you have entered programming mode.
3.
Press 1 time
Within 3 seconds, press
Button 1
to select
detector
programming
. You will hear
1 beep
as confirmation.
4.
Press 1 time
Within 30 seconds, press
Button 1
to
ADD
a detector.
You will hear
1 beep
as confirmation.
5.
Open the detector
you wish to add
Trigger the detector to be added
. If you are learning a
Passive Infrared detector remove the front cover or press
the tamper switch then release. Learning mode will
timeout in 60 seconds
.
When the system has successfully
received the code from the detector, the siren will
beep the
number of times of the zone
that the detector has to learn
into and will do so whenever any unlearnt detector
transmits.
Continued on next page…