26
TO ADD A DETECTOR …continued…
6.
Within 60 seconds
Within 60 seconds
Within 60 seconds
Press to add in STAY
& AWAY modes
OR
Press to add in
AWAY mode only
OR
Press to add in 24
hour mode
This option will
enable the detector in
both STAY and
AWAY modes.
This option will
disable the detector
in STAY mode
Use this option if
you are adding a
smoke detector.
The siren will
beep 1
time
as
confirmation
of learning the last
triggered detector.
The siren will
beep 2
times
as
c
onfirmation
of
learning the last
triggered detector.
The siren will
beep 3
times
as
c
onfirmation
of
learning the last
triggered detector.
7.
Walk Test mode
The system will
automatically
enter
Walk Test mode.
During this time, the siren will beep the number of times
of the zone which has been triggered.
Label
the detector
with its zone number for future reference. Detectors
which have been set to 24 hour mode will still trigger the
alarm. If a tamper switch is pressed on the main unit or a
wireless detector the siren will sound a low tone beep.
8.
Press to exit
When you press
Button 2
, the system will
exit
programming and walk test mode. You have now
completed adding a new detector.
NOTE:
Refer to (
5
) If you trigger a detector that is already learnt in you will hear one
low tone beep, simply trigger the correct detector until you hear the siren give the
normal zone confirmation beeps. You need to do step (
6
) after the correct detector has
been acknowledged, as it will keep accepting any unlearnt detector until step (
6
) is
done or it times out (60 seconds).
