background image

D e t e c t i o n

NEO Photo-ionization detector 

User Manual

D e t e c t i o n

10

6. Configuration Mode

The Config Mode is used to modify the instrument configuration settings. 

•  Press the Up key  

Esc

Ent

OK

 or Mode key 

Esc

Ent

OK

 to scroll through the list.

•  Press the Right key 

Esc

Ent

OK

 to select the menu item.

•  Press the Left key 

Esc

Ent

OK

  to select the menu item.

6.1.2 ENTERING NUMERICAL VALUES

For example, to enter a numerical password:

•  Increase or decrease the number from 0 through 9 by pressing the 

Up key 

Esc

Ent

OK

 

or Mode key

Esc

Ent

OK

.

•  Press the Right key 

Esc

Ent

OK

 or  the Left key 

Esc

Ent

OK

  to move the cursor.

•  After entering the desired numbers, press the Right key 

Esc

Ent

OK

 or  the Left key 

Esc

Ent

OK

   to move th cursor 

to

the ‘√ ‘ mark, and then press the Up key 

Esc

Ent

OK

 to accept and move to the next menu.

6.1 NAVIGATING CONFIG MODE

There are two types of menus in Config mode: 1) those that ask for selection from a list and 2) those 

that ask for a numerical value to be entered. 

6.1.1 SELECTION FROM A LIST 

For example, the Measurement sub-menu contains both a text-format list and a radial-button list.

Esc

Ent

OK

Esc

Ent

OK

Esc

Ent

OK

Esc

Ent

OK

Esc

Ent

OK

Esc

Ent

OK

Содержание NEO MP181




























Отзывы: