MODEL WPMZ-3- □ □ □ - □ □ - □ □ □
4/12
IM-0881-04
BASIC OPERATIONS, SETTINGS
６.
BASIC OPERATIONS OF MEASUREMENT DISPLAY
During measurement mode, the following key operations can be done.
DISP
DISP
MENU
FUNC
Setting
DISP
Shortcut Register
Measurement Display
Perform Shortcut function
Key Lock
DISP
ENTER
Holding down for 1sec
+
DISP
Holding down
for 1sec
７.
SETTING LAYER OVERVIEW
The setting menus of the WPMZ which are represented by key words and have layers, therefore desired setting menu can be selected
accurately. The layers consist of 1st layer to 4th layer (Only custom unit setting has the 5th layer.)
・
Settings of default measurement mode are below.
1st Layer
2nd Layer
3rd Layer
(setting items)
4th Layer (setting values)
Remarks
Initial values
Settable values
1. Input
StrainInputA
StrainInputB
Process
InputA
Process
InputB
PatternSelect
Pattern in use
Pattern 1/2/3/4/5/6/7/8
Select pattern No. to set.
InputRange
±3.5mV
(0
～
10V)
±3.5mV (0
～
5V/1
～
5V/±5V/0
～
10V
/±10V/0
～
20mA /4
～
20mA/±20mA)
Settings of process input are in ().*In
process input, offset and fullscale setting
are initialized by changing this item.
SensorPower
12V
12V/24V
Only in process input
BridgeExcitation
5V
2.5V/5V/10V
Only in straingauge input
AnalogFilter
300Hz
OFF/30Hz/300Hz/600Hz
Only in straingauge input
Sampling rate
4000times/sec
(1 input product)
2000times/sec
(2 input product)
4000 times/sec, 2000, 1000, 500, 200,
100, 20,10, 5, 2, 1
Select sampling rate
(4000 is enable only 1ch product)
MoveAve
32
None/2/4/8/16/32/64times
Set moving average of input.
Offset
0
Go to screen of setting offset.
Only process input.
Fullscale
10000
Go to screen of setting fullscale.
Only process input.
ManuAdjust
0
～
35000
Go to screen of manual adjust.
Only straingauge input.
AutoAdjust
0
～
35000
Go to screen of auto adjust.
Only straingauge input.
DecPoint
#####
#####/ #.####/ ##.###/ ###.##/ ####.#
DispUnit
None
None/Pa, kg, N, etc./CustomUnit
All units are mentioned in [10.UNIT
SETTINGS].
InputCorrect
None
None/Linearize
LinearizePoint
1stIn
：
0
1stOut
：
0
2ndIn
：
1000
2ndOut
：
1000
……
16thIn
:
15000
16thOut
:
15000
Each: ±99999
Enable only if [InputCorrect] is
[Linearize].
DispShift
0
±99999
Take over setting of [DecPoint].
TrackingZero
Interval
：
0
ActiveArea
：
0
Interval
：
0
～
99.99[sec]
ActiveArea
：
0
～
99999
Disable if setting value is 0[sec].
Take over setting of [DecPoint].
DispLimit
Lower
:
-99999
Upper
:
+99999
±99999
±99999
Take over setting of [DecPoint].
DispLoCut
0
0
～
99999
Cut both positive and negative.
InsDispStep
None
None/5steps/10steps
ZeroArea
0
0
～
99999[digit]
Disable if the value is 0[digit].
StableArea
0
0
～
99999[digit]
Disable if the value is 0[digit].
StableTime
0
0
～
99.99[sec]
Disable if the value is 0[sec].
2InputCalc
PatternSelect
Pattern in use
Pattern 1/2/3/4/5/6/7/8
Select pattern No. to set.
Expression
None
None/Add((A+B)+C)*K /Sub((B-A)+C)*K
/Mul((A*B)+C)*K /Div((B/A)+C)*K
/Ave (((A+B)/2)+C)*K
/HiSelect((Larger of A and B)+C)*K
/LoSelect((Smaller of A and B)+C)*K
/DifAbs(Abs of (B-A))+C)*K
/ErrRaito((A/B)-1)*K /Dens(B/(A+B))*K
/Add(A+B)*K+C /Sub(B-A)*K+C
/Mul(A*B)*K+C /Div(B/A)*K+C
Select a expression.
Const-C
C
：
0
C
：
±9.9999 x 10^(±5)
Coef-K
K
：
1
K
：
±9.9999
DecPoint
#####
#####/ #.####/ ##.###/ ###.##/ ####.#
DispUnit
None
None/Pa, kg, N, etc./CustomUnit
All units are mentioned in [8.BASIC
SETTINGS].
