Page 8 of 68
Doc. P/N: WSP-009-002
Version: V2.3
Issue Date: July 2014
Installation Manual
www.wassp.com
Equipment Lists
Transducer Type
The WMB-160/80F system uses a compact transducer intended to be mounted
inside the hull through a suitable opening to allow the bottom face of the
transducer to be in contact with the sea water.
Type WMB-160/80F-CT
The compact transducer is a rectangular-shaped, low-profile transducer for
through-hull mounting, encased in a sealed sea chest made to suit the vessel’s
hull dead rise angle. The compact transducer is best suited to steel and aluminium
hulls.
A sea chest for housing and sealing the transducer should be designed and
constructed by a reputable shipyard to suit the size and contours of the hull of
each individual vessel. This must be sized and constructed accurately.
The sea chest provides a stable platform for the transducer and must be mounted
as horizontal to the vessel as possible. An optional gland supplied by WASSP Ltd.
in alloy, plastic, or steel, provides the transducer cable through-hull seal.
The Compact Transducer is supplied standard with a 10m cable. Different cable
lengths are available. Please ask your WASSP representative for details.
INPUT
LEVEL
LOAD
LEVEL
FAULT
FREQ.
50Hz
60Hz
PURE SINE W
AVE INVERTER
AC OUT
PUT
OFF
ON
POWER SUPPLY OPTIONS
WMB-DC
WMB-AC
230 V AC UPS
24 V DC POWER SUPPLY
INVERTER
230 V AC UPS
24 V DC POWER SUPPLY
Power
Input
Figure 2 – Power Supply Options
