Page 39 of 68
Doc. P/N:
WSP-009-002
Version: V2.3
Issue Date: July 2014
Installation Manual
www.wassp.com
Advanced Technician Utilities
The Advanced Technician Utility forms part of the System Configuration Utility.
The advanced set up operations are only accessible when a technician’s dongle is
connected to the P.C. and should only be performed by a trained technician.
The advanced set up options do not help the system operator to use the system.
Any changes made to the options are more likely to hinder operation. They
are mainly available to allow advanced diagnosis of the system and to help
troubleshooting any problems it may have.
These functions can adversely affect the performance of the WMB-
160/80F system. Read this section carefully as any changes you
make may not be recoverable.
To enter the system configuration utility. See Figure 24:
1)
Click the
System Configuration Utility
button.
The system configuration utility window opens.
2)
Click
Technician
.
This opens the Technician Utility box.
3)
Click Options.
This opens the Options box.
4)
Click BTXR Options
Advanced Technician Options
By default, the advanced technician options are pre-configured to optimal
settings. Caution is advised as changing these options can drastically affect the
performance of the WMB-160/80F system.
The
Beam Forming
and
Data Decimation
dialogue boxes provide a list of the
default values to enable a technician to return the system back to its factory
settings if it becomes necessary. The default values are:
• Apply Software TVG:
On
(If Transducer Number > 199)
• Depth for 2:
20
.
• Depth for 4:
80
.
• Surface Detection Limit:
5.0
The remaining data values shown in the
Options box
are for information only and
cannot be changed.
