Page 36 of 68
Doc. P/N: WSP-009-002
Version: V2.3
Issue Date: July 2014
Installation Manual
www.wassp.com
Pre-commissioning procedures consist of ensuring the required software is loaded
and the display and network settings correctly set. This is generally only required if
the supplied computer settings have been changed or another computer installed.
Required Software
►
Windows XP.
►
Latest graphics drivers for your graphics card.
►
WASSP WMB-160/80F program version 50.
Required Display Settings
1)
If running, close the WASSP WMB-160/80F program.
2)
Right-click in the Windows desktop and click
Properties
.
3)
Click the
Settings
tab.
4)
In the
Colours
drop down box, set the colour to 32 bit.
Recommended Display Settings
1)
Set the screen resolution (
Screen area
) to 1024x768.
2)
Click the
Screen Saver
Tab
3)
Select Screen Saver
(None)
.
4)
Click the
Power…
button.
5)
Configure the power management settings so the monitor and hard disks
never turn off automatically.
6)
Click
OK
(to close the
Power Options Properties
box).
7)
Click
OK
(to close the
Display Properties
box).
Network Settings
If using an Ethernet WMB-160/80F version you must ensure the LAN settings are
correct.
1)
In the
Control Panel
, open
Network Connections
.
2)
View the Properties of the Local Area Connection that the WMB-160/80F is
connected to.
3)
Select
Internet Protocol (TCP/IP)
(install if not present).
4)
Click
Properties
. Select
Use the following IP Address
and input the fol-
lowing:
5)
Click
OK
(to close this window).
6)
Click
Close
(to save these settings).
Pre-commissioning
Procedures
Note: Before the Transfer Task is configured it may be necessary
to start the computer before the satellite compass.
IP address
: 192.168.65.10
Subnet mask
:
255.255.255.0
Default gateway
: (leave blank).
