21
2.6.5 Loading Media in Rewind Liner with Label Mode (Option)
This mode can rewind the media including liner and label on the rewind spindle.
1. Lift open the printer’s right side cover.
2. Insert the supply holder guide and paper core into the internal rewind for 1” core label roll.
Insert the supply holder guide, 3” label core adapter and paper core into the internal rewind for 3” core
label roll.
1” core label roll
3” core label roll
3. Insert media into the printer label spindle. Pull label roll leading edge forward through the media guide
bar, damper media sensor and place the label leading edge onto the platen roller. (Please refer to
section 2.6.1)
4. Then, pull approximately 650mm of label through the label redirect front panel.
5. Wrap the label onto the internal rewind spindle and stick the label onto the paper core.
6. Insert another supply holder guide into the internal rewind for 1” core label roll.
Paper core
Supply holder
guide
Supply holder guide
Paper
core
3” label core adapter
Содержание WPL608
Страница 1: ...i Wasp 610 608 Barcode Printer User s Manual...
Страница 14: ...11 Loading path for ribbon...
Страница 20: ...17...