Wasp WPL608 Скачать руководство пользователя страница 32

Страница: 32 / 65

3.1.1.1 Speed:

Use this option to setup print speed. The available print speed is between 4~12 ips and each

increament/decreament is 1 ips. The default print speed is 6 ips.

Press the

key to raise the print speed, and press the

key to decrease print

speed. Press the

key to set it into printer. Press the

key to cancel the

setting and return to the previous menu.

Note: If printing from enclosed software/driver, the software/driver will send out the SPEED

command, which will overwrite the setting selected on the front panel.

3.1.1.2 Density:

Use this option to setup printing darkness. The available setting is from 0 to 15, and the step is 1.

Printer default density is 8.You may need to adjust your density based on selected media.

Press

and

to increase/decrease the printing darkness. Press the

key to enable the setting. Press the

key to cancel the setting and return to the

previous menu.

Note: If printing from enclosed software/driver, the software/driver will send out the

DENSITY command, which will overwrite the setting selected on the front panel.

3.1.1.3 Direction:

The direction setting value is either 1 or 0. Use this option to setup the printout direction. Printer

default printout direction is DIRECTION 0.

Press the

key to set the direction as 1, and

to set it as 0, and the

key to enable the setting. Press the

key to cancel the setting and return to the

previous menu.

The following 2 figures are the printouts of DIRECTION 0 and 1 for your reference.

Print Setup 1/12

Speed

Density

Direction

Speed

Print Setup 2/12

Speed

Density

Direction

Density

Print Setup 3/12

Speed

Density

Direction

Содержание WPL608


































































Результаты поиска

Содержание WPL608

Отзывы:

Похожие инструкции для WPL608

Бренды по названию

Популярные бренды

Wasp WPL608, Руководство пользователя

Результаты поиска

Содержание WPL608

Отзывы:

Похожие инструкции для WPL608

Бренды по названию

Популярные бренды