Wasp 4070 FX, Руководство пользователя

Страница: 83 / 86

INTRODUCTION
© WASP S.r.l.
83
Additional Instructions
If the mechanical parts have to be dismantled, keep in mind that they consist of different types of material. The
user is therefore obliged to consider disassembling the printer in its parts in order to facilitate a differentiated
disposal aimed at recycling the various materials and products, in full compliance with all the regulations in force
on the spot.
NOTE:
The dismantling of the printer must be performed by a qualified mechanical maintenance technician.
ATTENTION:
Before carrying out any type of disassembly on the printer, make sure that the power supply is
disconnected.
ATTENTION:
Danger crushing hands, falling materials, cuts and abrasions. Obligation to use clothing appropriate
to the operation to be performed.
NOTE:
It is absolutely necessary to apply the regulations in force in the country of destination, concerning
the disposal of waste, so it is forbidden to disperse in the environment any type of processing
residue, oils, etc .. subdividing the dismantled parts by type for a correct separate collection of
materials.
NOTE:
Within the European Community, electrical equipment must be disposed of as prescribed by the
European Community Directive 2012/19 / EU on waste electrical and electronic equipment (WEEE).
ATTENTION:
The user is obliged to dispose of the equipment in the consortia and collection centers for the
treatment and recovery of “WEEE”.
9.3. Instructions for emergency situations
ATTENTION:
In the event of a fire, the operator must immediately give the alarm and move away from the area
to allow the intervention of trained personnel equipped with suitable protective and operational
means.
Electrical parts
In case of fire of electrical parts, intervene with CO2 extinguishers to limit and limit the damages
In general
Use ABC + Nitrogen powder extinguishers to quickly extinguish fires delimited to parts or areas without electrical
parts.