Wasp 4070 FX Скачать руководство пользователя | Manualshive

Страница: 12 / 86

background image

INTRODUCTION

© WASP S.r.l.

1

12

1

1.5.5. Safety stickers

The safety stickers shown below are applied to the printer. Before using the printer, check the integrity of these
adhesives and assimilate the instructions. Refer to paragraph 1.7 “Glossary and pictograms”. If the meaning is
not clearly understood, contact the Manufacturer.

ATTENTION:
The labels and stickers applied to the printer must be replaced before they become illegible. If one

or more plates (stickers) are missing or illegible, the operator must not use the printer until the new

plates (stickers) have been applied.

Legend:

Hot surfaces, pay attention not to touch when heated

1.6. Glossary and pictograms

1.6.1. Identification of operating personnel

The operator responsible for the operation or maintenance of the printer must possess the specific professional
requirements for each intended operation.
The operator must be instructed and therefore be aware of the tasks entrusted to him who has responsibility for
the job.
Below is a description of the professional profiles for the operators involved in the printer.

User

Qualified personnel, able to perform simple tasks, trained on using the printer.
He/she supervises the proper functioning of the same and the eventual first intervention in case an alarm
condition occurs.

Mechanical maintenance technician

Qualified technician able to conduct the printer under normal conditions, to intervene on the mechanical parts to
carry out all the necessary adjustments, maintenance interventions and repairs.
He/she is not enabled to work on electrical systems in the presence of voltage.

Electrical maintenance engineer

Qualified technician able to conduct the printer in normal conditions; it is in charge of all the electrical interventions
of regulation, maintenance and repair.
He/she is able to operate in the presence of voltage inside enclosures and junction boxes

Manufacturer Technician

Qualified technician provided by WASP S.r.l. to carry out operations of a complex nature in particular situations
or in any case according to what has been agreed with the user.

«
...
10
11
12
13
14
...
»

Содержание 4070 FX























































































Отзывы:

Нет отзывов

Похожие инструкции для 4070 FX

Бренд: Zeka Страницы: 54

Бренд: Xerox Страницы: 310

Бренд: Samsung Страницы: 82

Бренд: Samsung Страницы: 2

Figure 4 Standalone

Бренд: 3D Systems Страницы: 2

Бренд: Canon Страницы: 198

Бренд: BALCO Страницы: 24

Бренд: Samsung Страницы: 224

Бренд: OKIDATA Страницы: 13

Бренд: Grizzly Страницы: 56

Бренд: SNBC Страницы: 78

Бренд: Lexmark Страницы: 2

Бренд: AstroJet Страницы: 97

Бренд: Citizen Страницы: 32

Blaster ADVANTAGE

Бренд: CognitiveTPG Страницы: 20

Бренд: UnionTech Страницы: 44

6250N - Phaser Color Laser Printer

Бренд: Xerox Страницы: 467

Бренд: WOOSIM Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды