Wasp Barcode Technologies WPL308 Series, Руководство пользователя

Страница: 52 / 69

- 45 -
Left Position
This option is used to adjust print position horizontally on the
label. The range is -9999 to +9999 dots.
+0000
Reprint Mode
When reprint mode is enabled, you can reprint the last label
printer by pressing “UP” button on printer’s control panel.
Disabled
Format Convert
Selects the bitmap scaling factor. The first number is the original
dots per inch (dpi) value; the second, the dpi to which you would
like to scale.
None
Note: If printing from enclosed software/driver, the software/driver will send out the
commands, which will overwrite the settings set from the panel.