Wasp Barcode Technologies WPL308 Series, Руководство пользователя

Страница: 48 / 69

- 41 -
6.3 WPL2
This “WPL2” category can set up the printer settings for WPL2.
Speed
Density None
Direction Batch Mode
Print mode Peeler Mode
Offset Cutter Mode
Menu WPL Shift X Cutter Batch
Shift Y
Reference X
Reference Y
Code Page
Country
Item Description Default
Speed
Use this item to setup print speed.
N/A
Density
Use this option to setup printing darkness. The available setting is
from 0 to 15, and the step is 1. You may need to adjust your density
based on selected media.
8
Direction
The direction setting value is either 1 or 0. Use this item to setup the
printout direction.
0
Print mode
This item is used to set the print mode. There are 5 modes as below,
Batch
Mode
Printer Mode Description
None Next label top of form is aligned to the print head burn
line location. (Tear Off Mode)
Batch Mode Once image is printed completely, label gap/black
mark will be fed to the tear plate location for tear away.
Peeler Mode Enable the label peel off mode.
DIRECTION 0 DIRECTION 1
FE
ED