14
Installation
Before initial start-up of a Wascomat washer-
extractor, the following safety checks must be
performed:
•
Make sure the machine is properly bolted to
the floor.
•
Make sure that all electrical and plumbing
connections have been made in accordance
with applicable local codes.
•
Make sure that flexible water fill and drain
hoses of the proper length have been used to
avoid sags and kinks.
•
Make sure the machine is properly grounded
electrically.
Before the machine is operated, the door safety
interlock must be checked for proper operation
as follows:
•
When washer loading door is open, the
machine must not be able to start. Verify this
by attempting to start washer with door open
(see section ”Procedure”).
•
When washer is in operation, the loading door
is locked and cannot be opened. Verify this by
attempting to open the loading door when the
machine is operating. If necessary, consult
this manual for proper operation of the door
lock and door safety interlock or call a quali-
fied serviceman.
IMPORTANT:
Door safety interlock must be checked
daily in accordance with above procedure.
WARNING:
Before servicing Wascomat equipment,
disconnect electrical power.
1722
1723
27
28
Fig.
27
Fig.
28
