6
Installation
5
6
7
0274
0950
1133
Mechanical installation
•
Before mounting the machine place wide steel
shims on the concrete foundation over the
bolts.
•
Lift the machine and lower it in position. Never
use the door or the door handle to lift or lower
the machine since this can damage the door
and door interlock.
•
Check that the machine is level front-to-rear
and side-to-side and standing firmly on the
six supporting points. Spacing washers must
be used to take up space if one or more of
these points is not resting against the floor/
foundation.
•
Place flat washers over the foundation bolts
and secure the machine in position by tighte-
ning the self-locking nuts. See illustration 7
below.
•
Check and tighten the nuts every week for the
first month to compensate for any setting of
the foundation.
selflocking
nut
flat washer
Fig.
5
Fig.
6
Fig.
7
