INTIG 401 PULSE
DC Pulse Argon Welding Machine
A. Power protection switch: this switch is only for overcurrent protection,
please make another power switch separately;
B. Power lead: the three phase power cable is fixed on the machine by
screwed union;
C. Communication interface A: to connect the wired remote control
potentiometer and arc striking successful-signal connector;
D. Communication interface B: to connect the remote controller;
E. Name plate position;
F.
Serial number position;
G. Remote controller installation position;
H. Air cooling fan;
I.
Air inlet: to connect with the Argon gas reducing valve;
J.
Water inlet;
K. Water outlet;
5.3 Front lower panel description
A. Connect the work-piece;
B. To connect the welding torch switch connector;
C. Argon gas outlet;
D. To connect the welding torch;
E. To connect the water cooling torch water inlet;
F.
To connect the water cooling torch water outlet.
- 12 -
J
I
K
E
F
A
D
C
B
