INTIG 401 PULSE
DC Pulse Argon Welding Machine
A. Channel key: first time press the :channel key”, the voltage meter displays
the present channel number, the current meter displays the present present
stored welding parameter; Press the right/left selection key to display other
stored parameters; Press the “storage” key to store the present welding
parameter to the channel; Press “parameter selection” key to select a
stored parameter to use; Press “Channel” key to turn to next channel; It
quits the channel if there is no action within 5 seconds.
B. ”Storage” key: to store the present welding parameter to the present
channel;
C. “Parameter selection” key : to select a stored parameter to use;
5.1.6 Protecting indicating area:
A. Input abnormal indicator: this indicator lights on when input voltage higher
than 380±15% range or lack phase;
B. Over-heating indicator: when the temperature inside the machine is too
high, this indicator lights on;
C. Water cooling abnormal indicator: when use water cooling welding torch, it
shows the water pressure status; when the water pressure is low, this
indicator lights on.
5.2 The rear panel description
- 11 -
B
C
A
C
B
A
C
D
A
G
F
B
E
H
