27
Floor Applications
Step 6 -
Lay Floor Covering
Other Floor Coverings
Final Steps
•
When the tiles or levelling
compound have been
installed, conduct another
resistance test to ensure the
sensor and heater have not
been damaged and record in
the control card.
•
If you are planning to install
wood, carpet or vinyl over
the heater you
MUST
lay a
minimum 10mm levelling
compound over the heater.
You must ensure that all
heating cables are completely
covered. It is important that
the levelling compound
is suitable for use with
underfloor heating.
1
1
NOTE:
Before installing the
floor finish its suitability for
use with underfloor heating
and its maximum operating
temperature should be checked
against required operating
conditions.
