Warmtec VARILLA, Руководство пользователя

Страница: 34 / 44

When using for the first time, a long period of non-use, or a power outage, you will need to
set the time and day of the week. Time and day of the week settings can only be made when
the programmable mode icon is shown on the display. If it is not there, switch the mode
with the V button until the programmable mode icon appears.
To start setting the time and day, press and hold the V button for 3
seconds until the first two digits flash on the display.
flashing
Use the + and - buttons to set the hour from 0 to 23. After 30
seconds of inactivity, it will automatically go to the minutes setting.
flashing
Press the V button to enter the minute setting. As with the hours,
you can set the minutes with the + and - buttons. After 30 seconds
of inactivity, it will automatically go to the day of the week settings.
flashing
The default temperature in comfort mode is 19°C.
In the economy mode, it is possible to set the temperature lower than or equal to the
temperature in the comfort mode. By default, the temperature in economy mode is 15.5°C.
In this mode, the device will turn on when the temperature is below 7°C and turn off when
the temperature is above 7°C. In the case of anti-frost mode, it is not possible to set the
temperature.
Switching between modes is possible with the V button. It allows you to select the comfort,
economy, anti-frost mode in manual mode or switch to the programmable mode. The
mode in which the heater is currently operating is indicated by the icon at the top of the
display. The temperature is set using the
+ or - buttons. The temperature in the comfort and
economy modes can be set in the range of 7 ° C ... 30 ° C. To change the temperature in a
given mode, it must be done during the heater operation in this mode.
Time setting
Comfort mode
Economy mode
Anti-Frost mode
User manual - electric bathroom heater
34