background image

14 June 2016 

Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. 

All Dimension are in mm 

Open windows and doors 

Do not light any gas appliance 

Do not use any electrical appliance or switches 

Do not use the telephone in your home 

Leave the building; shut off the domestic gas supply valve (beside your meter) 

Call your gas supplier/gas fitter or the Fire Service for further advice 

POINTS OF SAFTEY

To the Customer /Home-Owner

 

WHAT DO YOU DO IF YOU SMELL GAS

 

*Lighting your gas fire using electronic or remote ignition systems may vary as per manufacturer instructions 

Warmington Industries recommend annual servicing of your gas fire by an approved Warmington dealer Gas Fitter.  

External surfaces should be dusted with a damp, lint-free cloth when the fire is cold. 

Warmington Industries provide 12 months warranty from the date of purchase, for domestic or commercial installations. 

This Warranty Covers : 

Replacement Parts and Labour for Gas Control Components due to Manufacturing Defects Only. 

Repair or Replacement of the Burner or Firebox Components due to Manufacturing Defects Only. 

Warranty cover will be considered void if the product is subject to incorrect installation, failure to operate the appliance  in accordance with 
the supplied instructions and specifications or is subject to damage or misuse beyond the expected conditions of normal use. 

All installations and servicing must be carried out by and approved Warmington dealer or Gas Fitter.

 

MAINTENANCE

 

Your Warmington Gas Decorative  Fire operates  on the principle of dual radiant and convected  heat. Therefore it is important to observe the following precautions 
associated with any heating appliance or open fire. 

 

Do not cover or restrict the fireplace upper or lower vents in any way as this may result in a build-up of hazardous gases within the room. 

 

The fire is not intended for the drying of clothing, bedding etc. 

 

Avoid installing this appliance in high traffic areas, strong draughts or near drapes or furniture. 

 

The use of an approved fireguard is recommended for the protection of young children. 

 

Avoid using aerosols when the appliance is operating. 

 

Avoid anyone leaning against or lying directly in front of the fire while operating. 

 

Do not place anything objects into or against the gas fire at any stage. 

 

The fire may release a small amount of smoke on its first start up which may take 1or 2 hours to dissipate . This is part of the curing process so ensure there 
is adequate ventilation within the room. 

 

Always use a registered Gas Fitter or Electrician  for installing and maintenance work  

 

Always use certified gas cylinders that have been tested and are safe to use.  

 

 

Never modify your gas appliance or its settings from those specified by the manufacturer.

 

APPLIANCE SAFETY

 Any gas fire appliance shall comply with the safety requirements of the current standards listed under “Related documents” in this specification. 

ELECTRONIC  CONTROL  SYSTEMS

  Any  gas  fire  appliance  fitted  with  manual  or  programmable  electronic  control  systems  shall  be  tested  and/or  approved  by  a 

recognised person or authority.  

SEISMIC RESTRAINTS

 All gas fires used for domestic and commercial purposes shall be firmly secured (unless defined as portable or mobile) to prevent dislodge-

ment from their point of fixture or installation during seismic activity. 

Содержание SG 700












Отзывы: