Waring FP2200, Руководство пользователя

Страница: 9 / 13

16 17
want to slice crosswise. Position the food pusher insert at the
top of the stack before pressing the ON switch. Use moderate,
steady pressure on the food pusher (or the food pusher insert) to
push the items down when the plate starts turning. If the pressure
is not steady, the cut items may vary in thickness. Avoid heavy
pressure, which may deform the plate.
2 – For lengthwise strips, stack the food items vertically. Vertical
insertion may also be used to produce finely chopped celery,
onions, etc. Quarter onions before loading the feed tube.
TROUBLESHOOTING
This section describes potential problems and the correct
solutions for them. Problems that cannot be solved with the
guidelines listed below should be referred to one of your local
distributors for assistance. A listing of authorized service
agencies is supplied with each Waring food processor.
Unit does not start when assembled correctly
• Pull the plug and try plugging into another outlet.
• Press ON button to ON.
• Make sure the bowl is properly positioned on the motor base,
that the bowl or chute cover is attached properly, and that
the safety interlock tab on the cover has properly engaged
the safety interlock switch.
Unit stops running during processing
• The unit may have overheated. Refer to Resetting Thermal
Protection section (page 13).
• Turn unit off and unplug.
• Remove bowl attachment.
• Remove food being processed from inside the bowl and
discard.
• Allow unit to cool for 5 minutes.
• Reassemble unit, and run first with the bowl empty, then put
food into the bowl and try again.
When dicing different types of produce, follow the above
procedure to clean out the dicing grid between operations.
Shredding
The FP2200 is equipped with the CAF20 – 3/16" Shredding Plate.
This plate is for processing cheeses such as mozzarella, jack,
swiss, or other soft food items. It is also used for making cole
slaw, shredded carrots or coconut, and potato strings or hash
browns.
To shred vegetables: Choose from the following options,
depending upon the quantity and/or shape of the items to be
shredded and the desired length of shreds:
1 – With the motor off, load the feed tube with large quantities
and/or items that you want to shred lengthwise. Position the food
pusher at the top of the stack before pressing the ON switch. Or,
insert the food pusher into the empty feed tube, remove the small
pusher, and load smaller quantities, and/or items that you want to
shred crosswise. Position the food pusher insert at the top of the
stack before pressing the ON switch.
2 – For longer, lengthwise shreds, stack the vegetables
horizontally. For shorter, crosswise shreds, insert the vegetables
vertically.
To shred cheese for pizza, etc.:
Cut well chilled cheese into
pieces that will fit into the feed tube. Load the cheese into the
feed tube, insert the food pusher and press the ON switch. Press
down moderately hard on the pusher. If cheese is allowed to
“bounce”, the results will be small, irregular pieces.
Slicing
The FP2200 is equipped with the CAF12 – 1/8" and CAF18 – 1/2"
slicing plates.
Choose from the following options, depending upon the quantity
and/or shape of the items to be sliced and the desired length of
slices:
1 – With the motor off, load the feed tube with large quantities
and/or items that you want to slice lengthwise. Position the food
pusher at the top of the stack before pressing the ON switch.
Or, insert the pusher into the empty feed tube, remove the small
pusher, and load with smaller quantities, and/or items that you