Waring FP2200, Руководство пользователя

Страница: 10 / 13

18 19
CLEANING AND MAINTENANCE
Clean the food processor and accessories prior to initial use and
after each use. Do not use harsh abrasive-type cleaners on any
part of the food processor. Wash the motor shaft with a small
brush.
Wash, rinse, sanitize and dry the bowl, covers, continuous feed
chute, small food pusher, large food pusher, accessory discs, and
S-blade prior to initial use and after use, unless they will be used
again immediately. With the exception of the dicing assembly
(dicing disc and slicing blade) the accessories are dishwasher
safe and may be cleaned and rinsed in the dishwasher instead of
manually in the sink. NOTE: DICING ASSEMBLIES ARE TO BE
HAND WASHED ONLY! Wash and rinse all of the above items
after each use.
A stiff bristle brush will help to knock food particles out of the
crevices of the discs and blades before washing. Handle very
carefully as the blades are sharp
For manual cleaning, it is recommended that you use washing
solutions based on non-sudsing detergents, and chlorine-based
sanitizing solutions that have a minimum chlorine concentration of
100 PPM. The following washing, rinsing, and sanitizing solutions,
or their equivalents, may be used:
SOLUTION PRODUCT DILUTION IN WATER TEMPERATURE
Washing *Ajax
®
Sanitizer ¼ oz. per Hot 115°F (46°C)
Cleaner Powder 2½ gallons
Rinsing Plain Water Warm 95°F (35°C)
Sanitizing
**Clorox ® 1 tablespoon per Cold 50°F (10°–21°C)
Institutional gallon
*
*Ajax
®
is a registered trademark owned by the Colgate-Palmolive Company.
**Clorox ® is a registered trademark owned by the Clorox Company.
Unit will not come up to full speed
• Bowl is overloaded – remove food being processed and
reload using smaller quantities.
If unit does not operate after you have followed the above
• Check outlet to be sure there is current.
• Check to be sure circuit breaker is on.
• Check to be sure the fuse is not blown if there are fuses on
this circuit.
• Contact your local distributor.
If unit starts to spark or smoke
• Turn unit off, unplug it, and call local factory-authorized
service agency.
If food processor makes grinding noise
• Turn unit off, unplug, disassemble, check bowl and blade to
see if they have been rubbing together.
• If bowl and blade are rubbing, call your local distributor.