Waring FP2200, Руководство пользователя

Страница: 6 / 13

10 11
HOW TO USE
Continuous use
For continuous processing, use the ON button.
Pulsing
The pulsing function is intended for use with the S-blade in the
work bowl.
• For rapid on-off operation, called pulsing, use the PULSE
button. The motor runs as long as you hold the button down;
it stops when you release it.
• You control pulsing. You control the duration of each pulse
by the amount of time you hold the button. You control
the frequency of pulses by the rate at which you press the
button. The interval between pulses must be long enough to
allow everything in the work bowl to fall to the bottom.
• Pulsing gives you precise control over chopping, mincing,
blending and mixing. You can process food to any texture or
consistency you want, from coarse to fine.
• Pulsing is also useful in processing hard foods. Pulse the
food a few times to break it up into smaller parts. Then
proceed with continuous use after the pieces are broken up
and easier to process.
• Always use the PULSE button for pulsing. Never move the
bowl (or chute) and cover assembly on or off to control
pulses. It is less efficient and could damage the machine.
Turning off
Always turn the machine off with the OFF button and wait until
the blade or disc comes to a complete stop before removing
the pusher assembly. The motor stops within seconds after the
machine is turned off.
tool and lift it straight up. Be careful not to touch the blades,
as they are extremely sharp.
• Remove the continuous feed chute from the motor base. If
the chute is pointing in the 4-o’clock position, just lift it up.
If not, rotate clockwise (left) to disengage the tabs on the
bottom of the chute platform (motor base) from the slots on
the bottom of the continuous feed chute.
OPERATING THE CONTROLS
• Plug the machine into an electrical outlet. The outlet must be
120 V, 60Hz.
• The control panel provides you with three control functions:
ON
PULSE
OFF
How they work:
ON: Press the ON button to start the motor and maintain
continuous operation.
PULSE: Turn on the motor, press the PULSE button, then
release. The motor will run as long as you hold the button, it
stops when you release it. Try it a few times.
OFF: When the motor is continuously running (by pressing
the ON button) you can turn the motor off by pressing the
OFF button.