890557_d•en•01.07.2014
We reserve the right to carry out improvements
92
Wisotronic 1-channel
Operating instructions
7.5.5 Sensor compensation
This menu serves to compare the internal and external temperature measur-
ing values of your Wisotronic with the temperature prevailing at the installa-
tion locations. This may become necessary if a sensor was mounted in an
unfavourable location (such as in the vicinity of a heat source or in direct
sunlight).
Press the function button [
Sett.
] in the main menu and then go to the menu
[
System
] > [
Sensor compensation
] menu.
The following menu appears where the max. possible number of sensors for
temperature is indicated:
7.5.5.1 Control panel temperature
The [
Control panel temperature
] value specifies by how many degrees
Celsius the measured value of the internal sensor of the Wisotronic is cor-
rected up or down. The setting range is –10 °C to +10 °C.
Turn the touch wheel to set the value [
Control panel temperature]
.
The [
Stand.
] function button sets the value to the factory setting.
7.5.5.2 Weather station 1 (2,3)
outside temperature
The [
Multisense 1 Outside temperature
] value specifies by how many
degrees Celsius the measured value of weather station 1 is corrected up or
down. The setting range is –30...+10 °C.
Turn the touch wheel to set the value [
Multisense 1 Outside temp.
].
The [
Stand.
] function button sets the value to the factory setting.
NOTE
Weather stations 2 and 3 are not available for Wisotronic 1-channel.
NOTE
When commissioning, note that the multisense weather station has an inter-
nal temperature correction feature that improves measurement accuracy. The
device follows temperature changes at a rate of approx. 10 min per °C.
When the Wisotronic is first switched on, the first temperature measurement
is taken at the multisense weather station. If the weather station was previ-
ously stored at a considerably lower or higher temperature, it may take sev-
eral hours before the correct temperature is displayed.
If the weather station is already at the temperature of its environment when
the Wisotronic is first switched on, the actual temperature measurement
value will be displayed from the start.
Start menu
Main menu
Settings
System
Sensor compensation
System settings
