890557_d•en•01.07.2014
We reserve the right to carry out improvements
74
Wisotronic 1-channel
Operating instructions
7.2.10 Manual operation
In this menu you can perform settings affecting the manual operation when
you jump from the main menu to the operating menu for the channel by
pressing the touch wheel.
In the main menu, press the function button [
Sett.
]. Now proceed to the
menu [
Comfort functions
] > [
Manual operation
].
The following view appears in the display:
7.2.10.1 Position OWA
The value “Position DOWN” specifies to which position the sun shading prod-
uct should move with manual operation through the function button “Down”.
The setting range is 0-100%; a value of 0% corresponds to the upper limit
position and a value of 100% to the lower limit position.
Turn the touch wheel to set the value “Position DOWN”.
The function button [
---
] leaves the position unchanged; the function button
[
Stand.
] sets the value for the “Position DOWN” to the factory setting.
NOTE
When the function button “DOWN” is pressed again while the sun shading
product is lowered, it always moves to 100% (lower limit position).
7.2.10.2 Slat angle OWA
This setting is only useful when you have chosen a slat product (external or
internal venetian blinds). If you have connected a slat product, such as ex-
ternal venetian blinds, to a channel, you can specify how the slats are to be
set to the "DOWN" position after the movement has been completed. This
is especially useful if you prefer a specific setting. In addition, you must no
longer tilt the slats manually after a move. The Wisotronic tilts the slats if pro-
grammed accordingly.
Turn the touch wheel to set the value "Slat angle DOWN".
The function button [
---
] leaves the slat angle unchanged; the function but-
ton [
Stand.
] sets the value “Slat angle DOWN” to the factory setting.
Start menu
Main menu
Settings
Comfort functions
Manual operation
Manual operation
