12
OPERATION OF THE
ROTOFIX HIGH-
PRESSURE SPRAY
LANCE
•
The RotoFix high-
pressure spray lance
allows the working
position to be
changed in pressure-
free condition.
•
Push back the slide
of the locking pin
(Fig. B/4)
.
•
Turn the screw fitting
of the RotoFix high-
pressure spray lance
until the pin engages
in the next bore.
OPERATION OF THE
FLEXOPOWERJET
NOZZLE
Turning the FlexoPower-
Jet nozzle allows the
working pressure to be
varied
(Fig. C/1)
.
OPERATION OF THE
PRESSURE AND
WATER FLOW
REGULATOR
Wap 2200 W
•
Set the pressure and
water volume by
turning the pressure/
volume regulator on
the cleaner
(Fig. D/4)
.
Wap 2200/3300
•
Set the pressure and
water volume by
turning the pressure/
volume regulator on
the cleaner
(Fig. D/4)
or at the VarioPress
control knob
(Fig. B/3).
The set pressure can be
read off from the
pressure gauge
(Fig. D/5 and E/5).
USE OF CLEANING
AGENTS
•
Predilute cleaning
agent as described
under „General“ and
pour into the cleaning
agent tank
(Fig. F)
.
The intake of cleaning
agent from an external
container is possible (see
„Options“).
Cleaning agent can be
drawn in via the injector
installed as standard only
in low-pressure mode:
•
Set the pressure/
volume regulator on
the cleaner to
maximum pressure
(Fig. D/4)
.
•
Turn the VarioPress
control knob towards
„+“ up to the stop
(Fig. B/3)
.
•
Turn the FlexoPower-
Jet nozzle towards
„CHEM“ up to the
stop.
The intaken volume of
cleaning agent can be
regulated by turning the
metering valve
(Fig. D/3 or E/3).
•
Spray the object to
be cleaned.
Depending on the
degree of soiling, allow
the cleaning agent to
work. Wash down
with a high-pressure jet.
Note!
If the high-pressure hose
is extended, no intake of
cleaning agent is possi-
ble.
Do not allow the
cleaning agent to dry
on the surface to be
cleaned!
FINISHING WORK
•
Turn the ON/OFF
switch to position „0“.
•
Close the metering
valve.
•
Turn off the water tap.
•
Actuate the trigger of
the spray gun until
the cleaner is depres-
surised.
•
Insert the trigger lock
(Fig. B/6)
.
•
Remove the cleaner
plug from the plug
socket.
•
Disconnect the water
hose from the cleaner.
