WANHAO Duplicator Five, Руководство пользователя

Страница: 8 / 13

C1 Install Power Supply
Now the next step is to give the Duplicator 5 power.
This is done by attaching the external power supply.
Detaching the power supply
1. If the power supply has to be detached, the first
step is to make sure the Duplicator 5 turned off. This
is done by pressing the power switch to 0.
First make sure the power switch is in the OFF
position, this is when the button at the back is
pressed to [0].
2. The corresponding power cable (for your country)
has to be inserted in the power brick of the power
supply.
3. The connector has to be inserted at the back of
the Duplicator 5, in the round hole next to the on/off
switch and USB slot. The flat side of the power plug
has to face towards the top of the Duplicator 5.
4. Now plug the external power supply into the wall
socket.
2. Next take the power plug out of the wall
socket.
3. The plug has a sliding collar. When
removing the plug from the machine, gently
slide the collar outwards which will release
the plug and allow it to come out with ease.
CAUTION : Please make sure not to pull
the cable. Excessive force may result in
breaking this component.
4. The main cable in the power brick can be
detached by pulling it out gently.