WANHAO Duplicator Five, Руководство пользователя

Страница: 13 / 13

Preparing a 3D model
1. Most 3D printable files that you will find on www.
thingshares.com are in the STL format. Or you can
use your own STL file.
2. When you have loaded a STL file into Maker . By
clicking Making, you might notice the progress bar.
4. When the 3D model is prepared, the Save toolpath
button shows up and gives you the option to save the
prepared model in a directory.
Finish page, Maker gives you an
indication about your print on
- Estimated Print Time
- Amount of material required
- And the weight of your 3D print
5. After you inserted the included SD-card into your
computer, Maker changes the Save toolpath Button
into the Toolpath to SD Button.
6. Just after you choose for the Toolpath to SD button
you will see the same progress bar but now it saves
the file on the SD card. Or you can copy the toothpath
*.i file into SD card directly.
7. When finished saving It will give you the
notification that your file has been saved.
8. Before taking out the SD-card make sure you
always choose the safely eject.
9. Then insert the SD card into the printer socket.
Navigate to Print from SD card to print.