![background image](http://html2.mh-extra.com/html/wanhao/duplicator-9/duplicator-9_instruction-manual_3352769044.webp)
Using Cura
Skirt
Skirt creates a line around the outside of your object. This is most commonly used to prime the
Extruder. In order to prevent missed filament at the beginning of a print, we recommend you leave
this setting on.
Line Count
This will define the number of loops the Skirt creates around the outside of your object.
Smaller models will require more loops to properly prime the Extruder.
Start Distance (mm)
This will define the distance away from your model that the skirt will be created. If using as an
envelope to prevent drafts, it is recommended to be closer to your object.
Minimal Length (mm)
This will define the minimum extruded line length for the skirt. This will over ride your line
count, producing as many lines as required to reach the minimal length.
Cool
This section will define how your Extruder cooling fan will operate during the print. Your fan will
not start until it has reached 25% or higher for speed settings. If your print speeds are slowed down
due to minimal layer time, the fan will run between minimum and maximum speed based upon
how much the layer is slowed down.
Fan on at Full Height (mm)
The fan will not turn on for the first layer. The fan will then be scaled between 0% and your
minimum fan speed based on layer height. It is especially helpful with high temperature
retaining filaments such as PLA.
Fan Speed Min (%)
Once the Z height is reached for Fan on at Full Height setting, this will be the speed your fan
runs at.
Fan Speed Max (%)
This is the fastest speed at which your fan will ever run. When your print speed is slowed
down due to Minimal Layer Time settings, your fan will run between minimum and maximum
speed. The maximum fan speed is reached when your printer speed is slowed by 50% or
greater.
44
AFTER SALES SUPPORT
86-571-23290996
Model : Duplicator 9
Содержание DUPLICATOR 9
Страница 1: ...you can WANHAO Duplicator 9 INSTRUCTION MANUAL MARKI...
Страница 2: ......
Страница 58: ......