WANHAO DUPLICATOR 9, Инструкция по эксплуатации

Страница: 14 / 58

14
Please go to home page and select “ LEVEL---AUTO LEVEL” , this function would
auto level the bed.
NOTE: Once you have done the auto leveling. The printer would memorize the
leveling data for the next printing. You don’t have to level the printer every time,
unless you feel the printer is not not leveled. Auto leveling is for general printing
purpose, if you need some special layer thickness or special purpose, you may
need to adjust the 4 bolts under bed to achieve more precise distance.
Manual leveling. If the Auto leveling can not meet your needs, you may try
manual leveling. Click “LEVEL—MANUAL LEVEL” , the instruction would guide
you to check 4 bed points.
Quick Guide
Click P1/P2/P3/P4 separately.
The distance between the Extruder and bed should be 0.1mm or roughly the thickness of an name card. The paper should
have very Slight friction as you moves it under the Extruder but should still slide freely.
14
AFTER SALES SUPPORT
86-571-23290996
support@wanhao3dprinter.com
Model : Duplicator 9