Wandy 2R, Руководство пользователя

Страница: 15 / 42

Infrastructure:
This type requires the presence of 802.11b/g Access Point. All communication is done via the Access
Point.
Ad Hoc:
This type provides a peer-to-peer communication between wireless stations. All the communication is done
from Client to Client without any Access Point involved. Ad Hoc networking must use the same SSID and
channel for establishing the wireless connection.
Channel Number
The channel the unit will operate on. When set to “Auto”, the device will find the least-congested channel for use.
Enable Mac Clone (Single Ethernet Client)
The MAC address of the unit will be the MAC address of the PC connected to the Wandy 2R unit. This canb only
be done in Client mode.
Enable Universal Repeater Mode
Universal repeater mode will make the Wandy 2R unit become client as well as AP on the same radio. In this mode
it can repeater any vendor AP.
Extended SSID:
The SSID of the Universal repeater mode can be different from the AP the client is connected to.
5.2 Advanced settings
These settings are only for more technically advanced users who have sufficient knowledge about wireless LAN.
These settings should not be changed unless you know what effect the changes will have on your device. The
default setting is optimized for the normal operation. For specific application, setting configuration will required
highly attention to reach optimistic condition.
Any unreasonable value change to default setting will reduce the throughput of the device.