Wandy 2R, Руководство пользователя

Страница: 17 / 42

choose the rate that the device uses for data transmission. The default value is “auto”. The device will use the
highest possible selected transmission rate.
Beacon Interval
The beacon interval is the amount of time between access point beacons in microseconds. The default beacon
interval is 100.
Broadcast SSID
Broadcasting the SSID will let your wireless clients find the device automatically. If you are building a public
Wireless Network, disable this function can provide better security. Every wireless stations located within the
coverage of the device must connect this device by manually configure the SSID in your client settings.
Int. Roaming
This function will let Wireless Stations roam among a network environment with multiple devices. Wireless Stations
are able to switch from one device to another as they move between the coverage areas. Users can have more
wireless working range. An example as the following figure
You should comply with the following instructions to roam among the wireless coverage areas.
For implementing the roaming function, the setting MUST comply the following two items.
1) All the devices must be in the same subnet network and the SSID must be the same.
2) If you use the 802.1 x authentication, you need to have the user profile in these devices for the roaming
station.
Block WLAN Relay (Isolate Client)
The device supports isolation function. If you are building a public Wireless Network, enable this function can
provide better security. The device will block packets between wireless clients (relay). All the wireless clients
connected to the device can’t see each other.
Transmit Power
The device supports four transmission output power levels 250, 200, 150 and 100mW for CCK (802.11b) mode and
two transmission output power levels 100 and 50mW for OFDM (802.11g) mode. User can adjust the power level
to change the coverage of the device. Every wireless stations located within the coverage of the device also needs
to have the high power radio. Otherwise the wireless stations only can survey the device, but can’t establish
connection with device.
5.3 Security
This device provides complete wireless security function include WEP, 802.1x, WPA-TKIP, WPA2-AES and WPA2-
Mixed in different mode (see the Security Support Table).
The default security setting of the encryption function is disabled. Choose your preferred security setting depending
on what security function you need.