Wandy 2R, Руководство пользователя

Страница: 42 / 42

9 SSH login
Start a SSH(Secure Shell) client session to login the device
The SSH server daemon inside device uses well-known TCP port 22. User must use SSH client utility such like
Putty to login the device.
The default password for user “root” is “wandy”, once user login the device then can change the password by CLI
command.
Execute CLI program
This program won’t execute automatically when user login the device. User must manually execute it by typing the
case-sensitive command “cli”. Please note that any modified settings won’t save permanently until user “Apply
Changes to Flash” or reboot it. The new settings modified by CLI will take effect after rebooting the device.
Before Start to Configure
To configure the device there is a web-browser interface. To access the web interfaces, make sure you are using a
computer connected to the same network as the device. The default IP address of the device is 192.168.1.1, and
the subnet-mask is 255.255.255.0.
The default configuration of the device is WISP mode.
The WISP mode can let you access the AP of your wireless ISP and share the same public IP address form your
ISP to the PCs connecting with the wired Ethernet port of the device.
Please note that the DHCP server inside the device is default to up and running with the IP range 192.168.1.100-
192.168.1.200. Do not have multiple DHCP servers in your subnet, otherwise it will cause abnormal situation.
Inside the CD, we provide the device auto-discovery tool, the tool can detect the device even your PC is not in the
same subnet as the device in case the IP address of device is changed and forgot by user. The tool only can
discover the device in your local area network.
The Wandy 2R unit can operate in many more modes then WISP with routing function of Wifi Brigde.
More information about these modes in chapter.